otometrics ICS Impulse USB User Manual Download Page 36

Page: 36 / 128

8.10

Collecting VOR data

For information about settings available in

Test Options

when collecting data, refer to the Reference Manual.

Note

•

The temporary patient is available to allow testing to start without entering any patient data. Refer to

Patient

data entry/lists

►

to create a new patient or open an existing patient.

1. The

Synchronized Room Video

will be displayed. Due to the faster frame rate acquisition of the camera, the

Head

Position Feedback

is not viewable for

VOR

tests.

2. Instruct the patient. (For example, tell them to keep their eyes open and stare at the fixation dot.)

3. To begin data collection, click

Start

or click the left button on the presentation remote.

Trace recordings display in the

Real Time Traces

window. This display includes the eye and head velocities.

Note

•

You can find more information in the ICS Impulse training video or at

www.icsimpulse.com

Otometrics - ICS Impulse USB

8 Oculomotor

Summary of Contents for ICS Impulse USB

































































































































Search results

Summary of Contents for ICS Impulse USB

Reviews:

Related manuals for ICS Impulse USB

Brands by name

Popular brands

otometrics ICS Impulse USB, User Manual

Search results

Summary of Contents for ICS Impulse USB

Reviews:

Related manuals for ICS Impulse USB

Brands by name

Popular brands