Opengear ACM7000 User Manual Download Page 60

Page: 60 / 246

Chapter 3: Serial Port, Device and User Configuration

3.10.3 Windows OpenVPN Client and Server set up

This section outlines the installation and configuration of a Windows OpenVPN client or a Windows

OpenVPN server and setting up a VPN connection to a console server.

Console servers generate Windows client config automatically from the GUI – for

Pre-shared Secret

(Static Key File)

configurations.

Alternately OpenVPN GUI for Windows software (which includes the standard OpenVPN package plus a

Windows GUI) can be downloaded from http://openvpn.net.

Once installed on the Windows machine, an OpenVPN icon is added to the Notification Area located in the

right side of the taskbar. Right click on this icon to start and stop VPN connections, edit configurations,

and view logs.

When the OpenVPN software begins running, the C:\Program Files\OpenVPN\config folder is scanned for

.opvn

files. This folder is rechecked for new configuration files whenever the OpenVPN GUI icon is right-

clicked. Once OpenVPN is installed, create a configuration file:

Summary of Contents for ACM7000























































































































































































































































Search results

Summary of Contents for ACM7000

Reviews:

Related manuals for ACM7000

Brands by name

Popular brands

Opengear ACM7000, User Manual

Search results

Summary of Contents for ACM7000

Reviews:

Related manuals for ACM7000

Brands by name

Popular brands