Chapter 6:
Alerts, Auto-Response & Logging
110
2.
Enter the IP or DNS
Host Address
of the host. If this is a DNS address, it must be resolvable by the
gateway.
3.
Select which
Services
are to be used in accessing the new host. A range of service options are
pre-configured in the default SDT Connector client (RDP, VNC, HTTP, HTTPS, Dell RAC, VMware
etc).
If you wish to add new services, proceed to the next section (
Adding a new service
) and return
here.
4.
Optionally, enter a
Descriptive Name
for the host, to display instead of the IP or DNS address, and
Notes
or a
Description
of this host.
5.
Click
OK
5.2.5 Manually adding new services to the new hosts
To extend the range of services that can be used when accessing hosts with SDT Connector:
1.
Select
Edit > Preferences
and click the
Services
tab. Click
Add
2.
Enter a
Service Name
and click
Add
3.
Under the
General
tab, enter the TCP Port that this service runs on (e.g. 80 for HTTP). Optionally,
select the client to use to access the local endpoint of the redirection
