User Manual
SNMP
Enables
netsnmp
in the console server. SNMP is disabled by default
NTP
6.
Click
Apply
. A confirmation message appears:
Message Changes to configuration succeeded
The Services Access settings can be set to allow or block access. This specifies which enabled services
administrators can use over each network interface to connect to the console server and through the
console server to attached serial and network connected devices.
1.
Select the
Service Access
tab on the
System > Services
page.
2.
This displays the enabled services for the console server
’s
network interfaces. Depending on the
particular console server model the interfaces displayed may include:
•
Network interface (for the principal Ethernet connection)
•
Management LAN / OOB Failover (second Ethernet connections)
•
Dialout/Cellular (V90 and 3G modem)
•
Dial-in (internal or external V90 modem)
•
Wi-Fi (802.11 wireless)
•
VPN (IPsec or Open VPN connection over any network interface)
3.
Check/uncheck for each network which service access is to be enabled /disabled
The
Respond to ICMP echoes
(i.e.
ping
) service access options that can be configured at this
stage. This allows the console server to respond to incoming ICMP echo requests. Ping is enabled
by default. For increased security, you should disable this service when you complete initial
configuration
