Chapter 6:
Alerts, Auto-Response & Logging
112
6.
On the Add Service screen you can click
Add
as many times as needed to add multiple new port
redirections and associated clients
You may also specify
Advanced
port redirection options:
7.
Enter the local address to bind to when creating the local endpoint of the redirection. It is not
usually necessary to change this from
localhost
.
8.
Enter a local TCP port to bind to when creating the local endpoint of the redirection. If this is left
blank, a random port is selected.
NOTE
SDT Connector can also tunnel UDP services. SDT Connector tunnels the UDP traffic through the
TCP SSH redirection, so in effect it is a tunnel within a tunnel.
Enter the UDP port on which the service is running on the host. This is also the local UDP port that
SDT Connector binds as the local endpoint of the tunnel.
For UDP services, you need to specify a TCP port under General. This is an arbitrary TCP port that
is not in use on the gateway. An example of this is the SOL Proxy service. It redirects local UDP
port 623 to remote UDP port 623 over the arbitrary TCP port 6667
