User Manual
6.2.3 UPS/Power Supply
Before configuring UPS checks in Auto-Response you first must configure the attached UPS.
To use the properties of any attached UPS as the trigger event:
1.
Click on
UPS / Power Supply
as the
Check Condition
2.
Select UPS
Power Device Property
(Input Voltage, Battery Charge %, Load %, Input Frequency
Hz or Temperature in °C) to be checked for the trigger. Some units have multiple power
supplies and allow you to specify
Power Supply #1
or
Power Supply #2
.
3.
Specify the
Trigger value
that the check measurement must exceed or drop below to trigger
the Auto-Response
4.
Select
Comparison type
as being
Above Trigger Value
or
Below Trigger Value
to trigger
5.
Specify any
Hysteresis
factor that is to be applied to environmental measurements (e.g. if an
Auto-Response is set up with a trigger event of a battery charge below 20% with a Hysteresis
of 5, the trigger condition will not resolve until the battery charge is above 25%)
6.
Check
Save Auto-Response
6.2.4 UPS Status
Before configuring UPS state checks in Auto-Response you first must configure the attached UPS.
To use the alert state of any attached UPS as the Auto-Response trigger event:
1.
Click on
UPS Status
as the
Check Condition
2.
Select the
reported
UPS State
to trigger the Auto-Response (either On Battery or Low Battery)
.
The Auto-Response resolves when the UPS state returns to the
Online
state
3.
Select which connected
UPS Device
to monitor and check
Save Auto-Response
6.2.5 Serial Login, Signal or Pattern
Before configuring serial port checks in Auto-Response, configure the serial port in Console server mode.
Most serial port checks are not resolvable so resolve actions will not be run.
To monitor serial ports and check for login/logout or pattern matches for Auto-Response triggers events:
1.
Click on
Serial Login/Logout
as the
Check Condition
. In the
Serial Login/Logout Check
menu
select
Trigger on Login
(to trigger when any user logs into the serial port) or
Trigger on
Logout
and specify
Serial Port
to perform check on, and/or
