Omron VARISPEED G7 -, Instruction Manual, Page: 156 / 417

User Constant Tables
5-
51
H3-08
Multi-func-
tion analog
input terminal
A2 signal
level selec-
tion 0: Limit negative frequency
settings for gain and bias
settings to 0.
1: Do not limit negative
frequency settings for
gain and bias settings to 0
(i.e., allow reverse
operation).
2: 4 to 20 mA (9-bit input).
Switch current and voltage
input using the switch on the
control panel.
0 to 2 2 No A A A A A 417H 6-24
Term A2 Sig-
nal
H3-09
Multi-func-
tion analog
input terminal
A2 function
selection
Select multi-function analog
input function for terminal
A2. Refer to the next table.
0 to 1F 0 No A A A A A 418H 6-25
Terminal A2
Sel
H3-10
Gain (termi-
nal A2) Sets the input gain (level)
when terminal 14 is 10 V (20
mA).
Set according to the 100%
value for the function set for
H3-09.
0.0 to
1000.0
100.0% Yes A A A A A 419H 6-25
Terminal A2
Gain
H3-11
Bias (termi-
nal A2) Sets the input gain (level)
when terminal 14 is 0 V (4
mA).
Set according to the 100%
value for the function set for
H3-09.
-100.0
to
+100.0
0.0% Yes A A A A A 41AH 6-25
Terminal A2
Bias
H3-12
Analog input
filter time
constant Sets primary delay filter time
constant in seconds for the
two analog input terminal (A1
and A2).
Effective for noise control
etc.
0.00 to
2.00
0.03
s
No A A A A A 41BH 6-25
Filter Avg
Time
Con-
stant
Number
Name
Description
Setting
Range
Factory
Setting
Change
during
Opera-
tion
Control Methods
MEMO
BUS
Regis-
ter
Page
Display
V/f
V/f
with
PG
Open
Loop
Vec-
tor
1
Flux
Vec-
tor
Open
Loop
Vec-
tor
2