39 of 135
2.2.2 Reader Configuration
In some cases, the application software may provide support for reader configuration. If so, follow the
instructions provided with the application.
The following procedure describes how to configure the reader directly from a PC using the browser-based
interface.
The reader is with a static IP address which is default setting '192.168.1.200'. At first you can connect to the
reader using the default IP address and change IP address to adjust it to your network environment.
Default network setting:
IP Address:
192.168.1.200
Subnet Mask: 255.255.255.0
Gateway: 192.168.1.254
If you are not using DHCP, you must know the IP address and subnet mask settings for the network
environment in which the reader will be running. If you are using DHCP, you must have a means of finding the
reader, typically by having a DHCP server update a DNS server.
How to change network settings is as the following:
1. Exit any reader applications that are running on the network.
IMPORTANT:
Running another reader application while using the browser-based interface may cause a
reader error. If this happens, reboot the reader or restart the system using the browser-based interface.
2. Verify that the reader is operational. All LED should be out except for ‘PWR’ and ‘RUN’ indicator which
should be on.
3. Start
a
Java-enabled web browser
from any network-enabled PC. This PC must be configured with an IP
address and subnet mask compatible with the reader’s settings. For example:
IP address 192.168.1.100
Subnet mask 255.255.255.0
4. Browse
to…
http://192.168.1.200
The V750 reader
browser-based interface to the reader is displayed.
V750-BA50D04-SG - Windows Internet Explorer
V750-BA50D04-SG
V750-BA50D04-SG