124 of 135
Description of Each Item
Reader Status
Item Description
Note
Product Type
Type name of the product
V750-BA50D04-SG
Firmware Version
Firmware version currently installed in
the reader.
100-000-000-0
Only the factory-default first
number is displayed.
Serial Number
Unique number for product set in the
factory.
MAC Address
The reader’s MAC address.
Ethernet Settings (Operation Mode)
Item Description
Host Name
Used to refer the host in the network
Domain Name
Name of network domain in the reader runs.
DHCP
Whether the reader uses DHCP server or not.
IP Address
The reader's IP address in the network
Subnet Mask
The reader's subnet mask in the network
Gateway
The reader's gateway address in the network
TCP/IP Port
Port number for command interface via Ethernet
RS-232C Settings (Operation Mode)
Item Description
Baud Rate [bps]
Baud rate [bps]
Data Bits
Data bit length
Parity Bit
Parity bit
Stop Bit(s)
Count of stop bit
Action
[Reset System]
To restart the system
,
press [Reset System] button. After displaying message "Accept RESET.
Reboot in one second." After resetting the reader, you can access the browser by clicking Reload button
or opening another browser page.
[Init All Settings]
To initialize all the settings of the reader
, press [Init All Settings] button. After displaying
message " Accepted INIT. Reboot in one second.", all the reader's settings are initialized to factory
installed settings. After initializing the reader, you can access the browser by clicking Reload button or
opening another browser.
Errors
1) Can Not Connect
It means that the host computer can not receive the data from the reader. In this case, you have to
check the Ethernet connection, restart the browser and then access the reader again.