![background image](http://html.mh-extra.com/html/omron/v740-hs01ca/v740-hs01ca_user-manual_741408080.webp)
80 of 135
(2) GET Communication (GETC)
This command allows the reader to read the current communication conditions. Just after SET
Communication command (SETC) is executed, new information shall be read out.
Command
GETC (S)
Param1
(S)
Param2
(S)
…
(S)
ParamN
<LF>
Note:
・
It specifies a parameter connecting a setting item to a setting value. (‘The setting
item does not have to be prepended with ‘ -‘ .)
・
In a single command, multiple setting items can be specified by separating with
space. (2 or more character space are acceptable for indicating separation.)
Response
GETC[RC](S)[Param1=Value1](S)...(S)[ParamN=ValueN]<LF>
[RC]: Response Code
[ParamN=ValueN]: Setting item and values
Note:
・
If multiple items are specified, the reader shall return response with connecting
specified items to the setting values with equal in the specified order. Alphabetical
characters included in the item name in the response shall be small characters.
・
If the setting item is ft1 or ft2, the five items shall be returned with space separation
between each item. Double quotations shall not be used for enclosing.
*(S) Space Character
Example 1) When [Antenna port #1 UHF power, Gen2 session value for Once Mode Reading] is read out:
[Tx] GETC pw1 ss1<LF>
[Rx] GETC0000 pw1=10 ss1=1<LF>
Example 2) When [Filter setting, Filter condition 1, Filter condition 2] is read out:
[Tx] GETC fte ft1 ft2<LF>
[Rx] GETC0000 fte=1&2 ft1=0 1 8 2 C0 ft2=0 1 20 16 125A<LF>