26 of 135
3. Connect the reader to the network by plugging a Shielded Ethernet cable into the Ethernet port.
or
Connect the reader to a PC (personal computer) by plugging a crossover Shielded Ethernet cable into the
Ethernet port.
Note:
If DHCP is to be used, then the network and server must be connected
before
powering up the
reader. If a DHCP server is not found, the reader will fall back to the static IP address:
Default IP address: 192.168.1.200 (Subnet mask: 255.255.255.0, Gateway: 192.168.1.254)
4. Plug the power adapter provided with the reader into the DC power input connector. Then connect the AC
power cord to a power outlet.
While the reader is powering up, the Power indicator is lighting. After the reader finishes its power-on self-
test, approximately 5 seconds, 'RUN' indicator will turn on. The reader is now ready for operation.
IMPORTANT:
DO NOT disconnect power during startup. Disconnecting power while booting the V750 reader
may result in improper startup.