![background image](http://html.mh-extra.com/html/omron/v740-hs01ca/v740-hs01ca_user-manual_741408029.webp)
29 of 135
1.4.6 I/O Interface
As an input/output port, the reader contains a terminal block of which connector is removable with screws.
Terminal block connector:
MC 1,5/10-STF-3,81 (produced by PHOENIX CONTACT)
Pin assignment
Pin No
Name
I/O
Description
1
OUT 1
OUT
Output port #1
2
OUT 2
OUT
Output port #2
3
OUT 3
OUT
Output port #3
4
OUT 4
OUT
Output port #4
5 OUT_COM -
Output
common
port
6
IN 1
IN
Input port #1
7
IN 2
IN
Input port #2
8
IN 3
IN
Input port #3
9
IN 4
IN
Input port #4
10 IN_COM -
Input
common
port
How to wire a terminal block connector with signal cables(s) and how to connect it to the reader body.
(1) Wire a signal cable(s) to the terminal block connector. *
- Loosen the cable fixing screw(s) (anticlockwise) and insert the signal cable(s) all the way into the
connector.
- Tighten the cable fixing screw(s) (clockwise).
(2) Mount the terminal block connector to the reader body.
(3) Fasten the terminal block connector with 2 mounting screws.
*Required Tool: Slotted driver
* Make sure to connect the signal cable to the terminal block connector prior to mounting the
connector to the body.
6
10
9
8
7
5
4
3
2
1
Input terminal
Output terminal
Mounting screw
Mounting screw
Cable fixing screws x 10