![background image](http://html.mh-extra.com/html/omron/v740-hs01ca/v740-hs01ca_user-manual_741408065.webp)
65 of 135
To set parameters, items in the following list shall be chosen and be described in to the command one’s way
down the list.
Parameter Details
Parameter
Setting value
Memory Bank
Memory bank of a GEN2 tag for “Read Data” or “Write Data” shall be
specified with the following number in decimal format.
- 0: Reserved Area
- 1: EPC Area
- 2: TID Area
- 3: User Area
Data Pointer
Memory address in the memory bank of the GEN2 tag for “Read Data” or
“Write Data” shall be specified with number(s) in the following range in
decimal format.
- Min: 0
- Max: 255
Data Length
Memory size to be accessed for “Read Data” shall be specified with the word
number(s) in the following range in decimal format.
- Min: 1
- Max: 32
-Note: One word length is 16bits.
Write Data
To write data into a tag with “Write ID” or “Write Data” command, the data
shall be specified in 32-bit hexadecimal format as below. (0x not required)
- Format: XXXXXXXX ... XXXXXXXX
X: 0 to 9 , A to F
Ex. 12345678
Lock Code
When Lock command is executed, this code shall be specified depending on
the type of lock.
For GEN2, 10-digit Lock value shall be specified with 0, 1 or * (0 and 1 mean
Action and * means MASK) for following five areas; Kill pwd, Access pwd,
EPC memory, TID memory, and User memory.
・
Format: XXXXXXXXXX
X: 0 , 1 or * (0:Off , 1:On , *:Don’t care)
chr. 1 2 3 4 5 6 7 8 9 10
Kill pwd
Access pwd
EPC memory
TID memory
User memory
Action
Fields
pwd
read/
write
perma
lock
pwd
read/
write
perma
lock
pwd
write
perma
lock
pwd
write
perma
lock
pwd
write
perma
lock