background image

WARNING: INSTALLATION OF THIS PRODUCT NEAR POWER LINES IS DANGEROUS.

FOR YOUR SAFETY, READ THE ENCLOSED “DANGER” BOOKLET BEFORE BEGINNING YOUR INSTALLATION.

Instruction Guide for Installation

Model 3010

UHF/VHF/FM
• HDTV
• Digital
• Analog

Summary of Contents for STEALTHtenna 3010

Page 1: ...LLATION OF THIS PRODUCT NEAR POWER LINES IS DANGEROUS FOR YOUR SAFETY READ THE ENCLOSED DANGER BOOKLET BEFORE BEGINNING YOUR INSTALLATION Instruction Guide for Installation Model 3010 UHF VHF FM HDTV Digital Analog ...

Page 2: ...t washers 1 mounting nest mast 1 rubber weather boot 4 M6 external tooth lockwashers LEFT SIDE RIGHT SIDE Main Unit bottom view VHF element LEFT side VHF element RIGHT side 4 M6 x 12mm self tap screws 2 M4 x 10mm self tap screws 4 M6 external tooth lockwashers PCB VHF element to slide under PCB Pre installed screw halfway turned down 4 Line up the holes in the element with the holes in the mountin...

Page 3: ... see the complete line of Channel Master Antenna Rotators If signal is weak install optional power amplifier Channel Master Model 3038 Find the installation you plan to make on the following page READ THE INSTRUCTIONS FOR ASSEMBLING THE ANTENNA AND THE INSTALLATION BEFORE YOU START THE ACTUAL WORK Your Channel Master retailer has all the mounts and accessories you ll need for your installation Mas...

Page 4: ...nect the mast with guy ring and guy wires attached to the mount Use three or four guy wires equally spaced around the mast and anchor the guy wires to the roof or eaves with eyebolts The guy ring should be clamped approximately 1 foot below the antenna Use roofing compound around the base of the mount screws and eyebolts to seal against moisture After the installation has been complet ed mount the...

Reviews: