4-12
Auto Focus Multi Code Reader V430-series User’s Manual (Z392)
Initiating Calibration
Initiating Calibration
Calibration can be initiated by serial command or from the
Calibration
interface in
ESP
.
A symbol must be in the reader’s field of view during the calibration process.
In
ESP
, the
Calibrate
button starts the calibration routine.
Note:
If you choose to calibrate the reader by sending a
<@CAL>
command, a decode is
also required for the calibration process to be completed successfully.
Summary of Contents for V430-F-series
