Omron V430-F-series User Manual Download Page 162

Page: 162 / 404

Auto Focus Multi Code Reader V430-series User’s Manual (Z392)

6-37

Symbologies

PDF417

Note:

Sending

<a1>

will cause PDF417 data to be prefaced with information consisting of

error correction level (ECC Level

), number of rows (

Rows), number of columns (

Columns), number of informative code words (

Info Code Words) and the number of data

characters (

Data Characters). This feature can be disabled by re-sending

<a1>

Fixed Symbol Length Status (PDF417)

Fixed Symbol Length (PDF417)

Note: Fixed Symbol Length Status

must be enabled for

Fixed Symbol Length

to take effect.

Usage:

Used in applications where a large amount of information (over 32 characters)

needs to be encoded within a symbol, typically where the symbol is transported

from one facility to another. For example, an automobile assembly line

might use a single symbol with multiple fields of information that will be

read at several stations along the way, without reference to a database.

Definition:

A two-dimensional, multi-row (3 to 90), continuous, variable length symbology

that has high data capacity for storing up to 2,700 numeric characters,

1,800 printable ASCII characters, or 1,100 binary characters per symbol.

Each symbol character consists of 4 bars and 4 spaces in a 17-module

structure.

Serial Cmd:

K476,

status

,[unused],fixed symbol length status,fixed symbol length

Default:

Enabled

Options:

0 = Disabled

1 = Enabled

Serial Cmd:

K476,

status,[unused],

fixed symbol length status

,fixed symbol length

Default:

Disabled

Options:

0 = Disabled

1 = Enabled

Usage:

Used to increase data integrity by ensuring that only one symbol length

will be accepted.

Definition:

When enabled, the PDF symbol must contain the same number of characters

as the symbol length setting before it can be considered a good read. The

reader will ignore any symbol not having the specified length.

Serial Cmd:

K476,

status,[unused],fixed symbol length status,

fixed symbol length

Default:

Options:

1 to 2710

Summary of Contents for V430-F-series





















































































































































































































































































































































































































Search results

Summary of Contents for V430-F-series

Reviews:

Omron V430-F-series, User Manual, Page: 162 / 404

Search results

Summary of Contents for V430-F-series

Reviews: