manualshive.com logo in svg

Omron V430-F-series, User Manual, Page: 297 / 404

Share
Download
Omron V430-F-series User Manual Download Page 297

10-18

Auto Focus Multi Code Reader V430-series User’s Manual (Z392)

Color Filter

Color Filter

Disable

No filter is applied to image. If you are attempting to read symbols with no filter applied, a 

white balance should be performed first to balance the red, blue, and green cells of the 

image sensor.

Enabled(General Purpose)

This is a general purpose filter that is applied to the RGB image to provide a grayscale 

image that can be used for most applications.
This filter should be used when reading 2D symbols, 1D symbols that are not positioned 

horizontally in the field of view, or a combination of 1D and 2D symbols. 

Horizontal 1D Symbols

This filter is applied to the RGB image to provide a grayscale image that is specifically 

designed to provide the best suitable image for a horizontally-positioned 1D symbol.
This filter should be used when reading 1D symbols that are positioned horizontally across 

the field of view.

Green Interpolate

This filter is applied to the RGB image to provide a grayscale image for decoding similar to 

a luminance calculation. Unlike a luminance calculation, Green Interpolate provides an 

image 

1:1

 resolution to the input image. This filter provides better omni-directional symbol 

decode performance. Like Horizontal 1D Symbols, and unlike General Purpose, a white 

balance is not necessary.
This filter is recommended for most decoding applications that can afford extra processing time.

Note: 

For high-resolution 1D symbols that are positioned horizontally, the Horizontal 1D 

Symbols filter is preferable.

Definition:

If you are using a 5 megapixel color V430-series, this filter captures an 

image in color. To process the image for symbol decoding, the image 

must be filtered or the R, G, and B cells need to be equalized. This can be 

done by applying one of the filters available or by performing a white 

balance with the current camera configuration before trying to decode a 

symbol. This option specifies the filter method that is applied to the RGB 

color image to produce a monochrome image. 

Usage:

<

K543,

color filter

>

Default:

Disabled

Options:

0 = Disabled (Raw, No Filter)

1 = Enabled
2 = Horizontal 1D Symbols
3 = Green Interpolate

Summary of Contents for V430-F-series





















































































































































































































































































































































































































Reviews:

No comments