Auto Focus Multi Code Reader V430-series User’s Manual (Z392)
13-7
Utilities
Counters by Serial Command
No-Read Counter
Sending
<N>
displays the total number of No-Reads that have occurred since the last reset.
No-Read Counter Reset
Sending
<O>
sets the No-Read Counter to 0.
Trigger Counter
Sending
<T>
displays the total number of triggers since the last reset.
Trigger Counter Reset
Sending
<U>
sets the trigger counter to 0.
Good Read/Match Counter (or Good Read Counter)
Sending
<V>
displays the total number of good reads matching the master symbol, or, if
Master Symbol
is not enabled, the number of good reads since the last reset. This counter
is always enabled, but will only work as a match count when
Master Symbol
is enabled. If
Master Symbol
is not enabled, this counter records the number of good reads. This count
can be requested at any time.
Good Read/Match Counter Reset
Sending
<W>
sets the Match Counter to 0.
Mismatch Counter
Sending
<X>
displays the number of decoded symbols since the last reset that do not
match the master symbol.
Mismatch Counter Reset
Sending
<Y>
sets the Mismatch Counter to 0.
Summary of Contents for V430-F-series
