Omron V430-F-series User Manual Download Page 138

Page: 138 / 404

Auto Focus Multi Code Reader V430-series User’s Manual (Z392)

6-13

Symbologies

EAN 128 Status (Code 128/EAN 128)

Output Format (Code 128/EAN 128)

Application Record Separator Status (Code 128/EAN 128)

Definition:

When this field is disabled, the reader will not check any Code 128 labels

for conformance to EAN requirements, or perform any special formatting.
When enabled, the reader can read symbols with or without a function 1

character in the first position. If a symbol has a function 1 character in the

first position, it must conform to EAN format. Symbols that conform to EAN

format will also be subject to the special output formatting options available

in this command.
If EAN status is required, the reader will only decode symbols that have a

function 1 character in the first position and that conform to EAN format. All

symbols read will be subject to the special output formatting options available

in this command.

Note:

Code 128 status must be enabled for EAN status to be active.

Serial Cmd:

K474,

status,fixed symbol length status,fixed symbol length,

EAN 128 status

output format,application record separator status,application record separator

character,application record brackets,application record padding

Default:

Disabled

Options:

0 = Disabled

1 = Enabled

2 = Required

Definition:

Standard

, the reader will not apply special EAN output formatting

options.
In

Application

, the reader will apply the special EAN output formatting

options to decoded EAN-conforming symbols.

Serial Cmd:

K474,

status,fixed symbol length status,fixed symbol length,EAN 128 status,

output format

,application record separator status,application record separator

character,application record brackets,application record padding

Default:

Standard

Options:

0 = Standard

1 = Application

Definition:

When enabled, an EAN separator will be inserted into the output between

fields whenever an EAN-conforming symbol is decoded and EAN output

formatting applies.

Serial Cmd:

K474,

status,fixed symbol length status,fixed symbol length,EAN 128 status,

output format,

application record separator status

,application record separator

character,application record brackets,application record padding

Default:

Disabled

Options:

0 = Disabled

1 = Enabled

Summary of Contents for V430-F-series





















































































































































































































































































































































































































Search results

Summary of Contents for V430-F-series

Reviews:

Related manuals for V430-F-series

Brands by name

Popular brands

Omron V430-F-series, User Manual

Search results

Summary of Contents for V430-F-series

Reviews:

Related manuals for V430-F-series

Brands by name

Popular brands