78
TOMPYEUOQ2A03C AC Drive Q2A Installation and Operation Instructions
Tabella 4.1 Componenti e funzioni del tastierino
Sim
bolo
Nome
Funzione
A
LED RUN
Si accende per segnalare che l
’
inverter ha azionato il motore.
Il LED passa a OFF all
’
arresto dell
’
inverter.
Lampeggia per segnalare che:
•
L
’
inverter sta decelerando per fermarsi.
•
L
’
inverter ha ricevuto un comando Run con riferimento frequenza di 0 Hz, ma l
’
inverter non è impostato per il controllo velocità 0.
Lampeggia velocemente per mostrare che:
•
L
’
inverter ha ricevuto un comando Run dai morsetti MFDI mentre passava da modo LOCALE a modo REMOTO.
•
L
’
inverter ha ricevuto un comando Run dai morsetti MFDI mentre non era in Modo inverter.
•
L
’
inverter ha ricevuto un comando di arresto veloce.
•
La funzione di sicurezza disattiva l
’
uscita dell
’
inverter.
•
L
’
utente ha premuto
sul tastierino mentre l
’
inverter sta operando in modo REMOTE.
•
L
’
inverter viene alimentato con un comando Run attivo e
b1-17 = 1 [RUN@PowerUp Selection = Disregard RUN]
.
B
LED ALM
Si accende quando l
’
inverter rileva un
’
anomalia.
Lampeggia quando l
’
inverter rileva:
•
Allarme
•
Errori di funzionamento
•
Un
’
anomalia o un allarme durante l
’
Auto-Tuning
La spia si spegne durante il funzionamento regolare dell
’
inverter. Non sono stati rilevati allarmi o anomalie.
C
Slot di inserimento per card
microSD
Punto di inserimento per una scheda microSD.
D
Tasti funzione
F1, F2, F3
Il menu mostrato sul tastierino serve a impostare le funzioni dei tasti funzione.
Il nome di ciascuna funzione è visualizzato nella metà inferiore del display.
E
Indicatore LOCAL/
REMOTE
Acceso: il tastierino controlla il comando Run (modalità LOCALE).
Spento: il morsetto del circuito di controllo o il dispositivo di trasmissione seriale controlla il comando Run (modalità REMOTO).
Nota:
•
LOCALE: funzionamento attraverso il tastierino. Utilizzare il tastierino per trasmettere i comandi Run/Stop e il comando di
riferimento di frequenza.
•
REMOTO: funzionamento attraverso il morsetto del circuito di controllo o la trasmissione seriale. Utilizzare la sorgente di
riferimento di frequenza immessa in
b1-01
e la sorgente Comando RUN da tastiera selezionata in
b1-02
.
F
Tasto di selezione LO/RE
Commuta il controllo dell
’
inverter per il comando Run e il riferimento di frequenza tra tastierino (LOCALE) e sorgente esterna
(REMOTO).
Nota:
•
Il Tasto Selezione LOCALE/REMOTO continua a rimanere abilitato dopo che l
’
inverter si è arrestato in Modo inverter. Impostare
o2-01 = 0 [LO/RE Key Selection of Function = Disabled]
per disabilitare la commutazione da REMOTO a LOCALE con
.
•
L
’
inverter non commuta tra LOCALE e REMOTO quando riceve il comando Run da una sorgente esterna.
G
Tasto STOP
Interrompe il funzionamento dell
’
inverter.
Nota:
Utilizza un circuito a priorità di arresto. Premere
per arrestare il motore anche se è attivo un comando Run ai morsetti
MFDI. Impostare
o2-02 = 0 [STOP Key Selection of Function = Disabled]
per disabilitare la priorità in
.
H
Tasto freccia sinistra
•
Sposta il cursore a sinistra.
•
Torna alla schermata precedente.
Tasto freccia su/Tasto
freccia giù
/
•
Fa scorrere la schermata verso l
’
alto o verso il basso per mostrare la voce precedente o la successiva.
•
Seleziona i numeri del parametro e aumenta o riduce i valori di impostazione.
Tasto freccia destra
(RESET)
•
Sposta il cursore a destra.
•
Continua alla schermata successiva.
•
Riavvia l
’
inverter per resettare un
’
anomalia.
Tasto ENTER
•
Inserisce valori e impostazioni del parametro.
•
Seleziona le voci del menu per consentire all
’
utente di spostarsi da una schermata all
’
altra del tastierino.
•
Seleziona ogni modalità, parametro e valore impostato.
I
Tasto RUN
Avvia l
’
inverter in modo LOCALE.
Avvia il funzionamento in modo Auto-Tuning.
Nota:
Premere
sul tastierino per impostare l
’
inverter in modalità LOCALE prima di mettere in funzione il motore con il tastierino.
J
Morsetto USB
Punto di inserimento per un cavo USB (USB 2.0, tipo: A - mini-B). Utilizzare il cavo USB per connettere l
’
inverter al computer.
Summary of Contents for Q2A-A Series
