12
TOMPYEUOQ2A03C AC Drive Q2A Installation and Operation Instructions
Table 1.2 Drive Modes, Menu Screens and Functions
Mode
Menu Screen
Function
Drive Mode
MONITORS
Sets monitor items to display.
Programming Mode
AUTOTUNING
Auto-Tunes the drive.
INITIALIZATION
Changes initial settings.
APPLICATION
Changes application settings.
TUNING
Changes tuning settings.
REFERENCE
Changes reference settings.
MOTOR
Changes motor settings.
OPTIONS
Changes external options settings.
TERMINALS
Changes terminals settings.
PROTECTION
Changes protection settings.
SPECIAL
Changes settings for special applications.
KEYPAD
Changes keypad settings.
Q2PACK PARAMETERS
Changes parameters of Q2Pack software.
Q2PACK JOINTS
Changes joints of Q2Pack software.
◆
Mechanical Installation
WARNING
Fire Hazard. Do not put flammable or combustible materials on top of the drive and do not install the drive
near flammable or combustible materials. Attach the drive to metal or other noncombustible material. Failure to obey can cause
death or serious injury.
CAUTION
Crush Hazard. Do not hold the drive by the front cover or terminal cover. Tighten the screws correctly before
moving the drive. Failure to obey can cause minor to moderate injury.
NOTICE
Do not put drive peripheral devices, transformers, or other electronics near the drive. Shield the drive from
electrical interference if components must be near the drive. Failure to obey can cause incorrect operation.
NOTICE
Do not let unwanted objects, for example metal shavings or wire clippings, fall into the drive during drive
installation and project construction. Put a temporary cover over the top of the drive during installation. Remove the temporary
cover before start-up or the drive will overheat. Failure to obey can cause damage to the drive.
NOTICE
Install the drive as specified by EMC Guidelines. Failure to obey can cause incorrect operation and damage to
electrical devices.
NOTICE
Obey correct electrostatic discharge (ESD) procedures when you touch the drive. Incorrect ESD procedures
can cause damage to the drive circuitry.
■
Installation Environment
The installation environment is important for the lifespan of the product and to make sure that the drive
performance is correct. Make sure that the installation environment agrees with these specifications.
Environment
Conditions
Area of Use
Indoors
Power Supply
Overvoltage Category III
Ambient Temperature
Setting
IP20 enclosure: -10 °C to +60 °C (14 °F to 140 °F). Derate the output current and output voltage if the drive is installed in areas with ambient
temperatures from +50 °C to +60 °C (122 °F to 140 °F).
UL Type 1 enclosure: -10 °C to +50 °C (14 °F to 122 °F). Derate the output current and output voltage if the drive is installed in areas with ambient
temperatures from +40 °C to +50 °C (104 °F to 122 °F).
•
Drive reliability is better in environments that do not have wide temperature fluctuations.
•
When installing the drive in an enclosure, use a cooling fan or air conditioner to keep the internal air temperature in the permitted range.
Humidity
95% RH or less, non-condensing
Storage Temperature
-20 °C to +70 °C (-4 °F to +158 °F)
Summary of Contents for Q2A-A Series
