TOMPYEUOQ2A03C AC Drive Q2A Installation and Operation Instructions
47
WARNUNG
Gefahr eines Stromschlags. Erden Sie den Neutralpunkt an der Spannungsversorgung zur Erfüllung der
EMV-Vorschriften, bevor Sie den EMV-Filter aktivieren oder wenn hochohmige Erdung vorliegt. Wenn der EMV-Filter aktiv ist,
ohne dass der Neutralpunkt geerdet ist, oder wenn die Erdung einen hohen Widerstand hat, kann dies schwere oder tödliche
Verletzungen zur Folge haben.
WARNUNG
Gefahr eines Stromschlags. Schließen Sie das Erdungskabel ordnungsgemäß an. Das Nichtbeachten kann
schwere oder tödliche Verletzungen zur Folge haben.
HINWEIS
Wenn Sie den internen EMV-Filter deaktivieren, drehen Sie die Schrauben von ON auf OFF, und ziehen Sie
sie dann mit dem angegebenen Drehmoment fest. Wenn die Schrauben komplett entfernt oder mit einem falschen Drehmoment
angezogen werden, kann es zum Ausfall des Frequenzumrichters kommen.
HINWEIS
Stellen Sie für Netzwerke, die nicht symmetrisch geerdet sind, die EMV-Schalterschraube oder -schrauben in
die OFF-Position. Das Nichtbeachten kann Schäden am Frequenzumrichter zur Folge haben.
Stellen Sie sicher, dass das symmetrische Erdungsnetz vorhanden ist, und setzen Sie den oder die Schraubschalter
in die ON-Position, um den integrierten EMV-Filter entsprechend der EMV-Richtlinie zu aktivieren.
Abbildung 2.6 Symmetrische Erdung
HINWEIS
Beim Einsatz des Frequenzumrichters in einem nicht geerdeten Netzwerk, oder bei hochohmiger oder asym-
metrischer Erdung, bringen Sie die Schraube oder die Schrauben in die OFF-Position, um den integrierten EMV-Filter zu deakti-
vieren. Das Nichtbeachten der Anweisungen kann Schäden am Frequenzumrichter zur Folge haben.
Wenn Sie eine EMV-Schalterschraube verlieren, installieren Sie eine neue Schraube mit der passenden Größe und
dem korrekten Anzugsmoment.
HINWEIS
Verwenden Sie nur die in diesem Handbuch beschriebenen Schrauben. Das Nichtbeachten kann Schäden
am Frequenzumrichter zur Folge haben.
Tabelle 2.6 Schraubengrößen und Anzugsmomente
Modell
Schraubengröße
Anzugsmoment
Nm
2004 - 2082, 4002 - 4060
M4×20
1.0 - 1.3
2110 - 2211, 4075 - 4168
M4×25
1.0 - 1.3
2257 - 2415, 4208 - 4675
M5 × 25
2.0 - 2.5
◆
Eingang „Sicherer Halt“
Abbildung 2.7 TÜV-Markierung
Die TÜV-Markierung weist darauf hin, dass das Produkt den Sicherheitsnormen entspricht.
In diesem Abschnitt sind Vorsichtsmaßnahmen für den Betrieb des Eingangs
„
Sicherer Halt
“
beschrieben. Weitere
Informationen erhalten Sie beim Hersteller.
Tabelle 2.7 Angewandte Sicherheitsnormen und Einheitsnormen
Sicherheitsnormen
Einheitsnormen
Funktionale Sicherheit
IEC/EN 61508:2010 (SIL3)
IEC/EN 62061/A2:2015 (SILCL3)
IEC/EN 61800-5-2:2007 (SIL3)
Maschinensicherheit
ISO/EN ISO 13849-1:2015 (Cat. 3, PL e)
EMV
IEC/EN 61000-6-7:2015, IEC/EN61326-3-1:2008
SIL = Safety Integrity Level (Sicherheitsanforderungsstufe).
EN
Summary of Contents for Q2A-A Series
