![background image](http://html1.mh-extra.com/html/omron/nt600m-series/nt600m-series_operation-manual_743776077.webp)
70
PT Settings
Memory Type
RAM
Memory Size
128 KB
Host RUN
Disable
Mode Changes
No
Next Page
i
Memory type and memory size are displayed only after the screen memory
has been initialized. If it has not been initialized, then “N.A.” is displayed.
2) DN-type PTs
PT Settings
Memory Type
RAM
Memory Size
128 KB
Host RUN
Disable
Mode Changes
No
Exp. I/O Unit
Standard
Next Page
i
•
When an Expansion I/O Unit is connected to a DN-type PT, the 12-key
Function Key Unit type is displayed.
Standard:
12-key Function Key Unit
Not Connected; No Expansion I/O Unit is connected.
•
If a 12-key Function Key Unit becomes disconnected during operation, a
continuous buzzer will sound and a “No Expansion I/O Unit” error message
will be displayed.
Host Interface Unit Settings
The DIP switch settings on the Host Interface Unit can be displayed by press-
ing the Down Key while PT settings are being displayed. The following dis-
play example is for the NT600M-LK201 Host Link Interface Unit. For exam-
ples of other Host Interface Units, see the
Host Interface Unit Operation
Manual
.
Host Link I/F Settings
Beginning word
DM0000
Number tables
32
String tables
8
Baud Rate
9600 bps
Page
j
To return to the PT Settings display, press the Up Key.
6-2-8
Initialization
You must initialize the internal memory when using the SRAM or EEPROM
for the first time. Initialization can also be used to clear all of the data already
registered in the NT600M. Screen data can be initialized regardless of the
setting for the resume function.
System Menu and Transmit Mode
Section 6-2
Summary of Contents for NT600M Series
Page 1: ...NT600M Programmable Terminal Operation Manual Revised October 1997 ...
Page 2: ...iv ...
Page 4: ...vi ...