![background image](http://html1.mh-extra.com/html/omron/nt600m-series/nt600m-series_operation-manual_743776020.webp)
10
(2) Display Functions
Function
NT20M-ZASAT
Support Tool
NT600M-SMR
jjj
System ROM
PT Models
Remarks
-EV4
onwards
-EV1
-EV1
-E
Vertical and
horizontal
display
X: Horizontal only.
Bar
graphs
Display width
enlargement (2
to 255 dots)
X: Select either 8 or 16
dots.
+/-- display
F
X
F
X
All models
X: + direction only.
% value
enlargement
display
F
F
X: Equivalent display
only.
Lamp display:
Rectangular or circular
X: Rectangular only.
Lamps/touch switches:
Guide character mark
input
X: Mark input not
possible.
Touch switches: Solid or
rectangular frame
DT-type only
X: Rectangular frame
only.
Numeric setting 10-key
layout
F
X
F
X
All models
(See note 1.)
Only when the screen
attribute “10-key” is set to
“User.”
Numeric display
enlargement (64x max.)
F
X
F
X
All models
X: Equivalent display
only.
Direct connection
See note 3.
SMR 31-E/32-E
DT-type only
Notes
3. Some restrictions may apply, depending on the PT model.
4. In order to use the direct connection function, a Support Tool version of
“-EV4” or higher must be used.
1-6
System Configuration
In order to operate the NT600M, connect a personal computer or a Program-
mable Controller, to serve as a host, to the Host Interface Unit (sold sepa-
rately) at the back of the NT600M. For details on connecting the Host Inter-
face Unit, and on host programs, refer to the
Host Interface Unit Operation
Manual
.
The following interfaces can be used for communications: RS-232C,
RS-422A, Wired Remote I/O System (SYSMAC BUS), Host Link System
(SYSMAC WAY), or C200H Host Interface. A Screen Data Memory Board,
NT600M-MP/MR
jjj
, is also required and must be purchased separately.
System Configuration
Section 1-6
Summary of Contents for NT600M Series
Page 1: ...NT600M Programmable Terminal Operation Manual Revised October 1997 ...
Page 2: ...iv ...
Page 4: ...vi ...