Omron NT600M Series, Operation Manual

Page: 30 / 101

20
2. Place the Screen Data Memory Board on the main rail, push the spacer
in the direction of the arrow until it makes a clicking sound, and line the
board up with the connector.
Rail
Spacer
Connector
Lined up with connector
3. Holding the Memory Board’s installation fitting as shown in diagram A,
insert the black latch on the bottom into the hole in the main unit and
press the black knob down until it clicks into place.
When the knob is
pulled up, it looks
like Illustration A
on the left.
Black latch
Black knob
Installation fitting
A B
Installation fitting
Spacer
Screen Data Memory Board
When removing the Screen Data Memory Board, first turn off the power to
the PT and then remove the installation fitting by pulling up on the black
knob. Then pull the Memory Board’s spacer in the opposite direction of that
shown above and take out the Memory Board.
2-2 Installation Environment
The NT600M has strong environmental resistance and high reliability, but you
can maximize system reliability and make the most of its functions by observ-
ing the following considerations during installation.
2-2-1 Installation Site
Avoid installing the NT600M where any of the following conditions exist.
•
Ambient temperatures exceeding a range of 5
°
C to 40
°
C for liquid crystal
display PTs or 0
°
C to 50
°
C for EL display PTs.
•
Abrupt temperature changes and condensation.
Installation Environment Section 2-2