![background image](http://html1.mh-extra.com/html/omron/nt600m-series/nt600m-series_operation-manual_743776063.webp)
55
Example 2: Switches Created at Points E, F, and G
If switches E and F are turned ON
simultaneously in this switch configuration, switch G
will also turn ON.
Minimum touch switch frame
E
F
G
5-1-2
Creating Touch Switches (DT-type PTs Only)
Just as with lamps, touch switches are created and registered with the Sup-
port Tool. The setting content is as follows:
Setting Parameters
Combine your choices of rectangular sections from the among the 128
blocks shown in the diagram below, and designate them as switches. The
smallest possible switch is one block.
Number of Settings
A maximum total of 128 switches can be set per screen. If you wish, the en-
tire screen can also be set as one input switch.
Settings by Support Tool
Frame display
Standard/Solid/None
Reverse video display at input
Yes/No
Guide characters
Yes/No
16
8
Example of On-screen Touch Switches
Power error
Oil pres error
Man
Forwd
Back
Up
Down
Stop
Auto
On-screen Switch Inputs
Section 5-1
Summary of Contents for NT600M Series
Page 1: ...NT600M Programmable Terminal Operation Manual Revised October 1997 ...
Page 2: ...iv ...
Page 4: ...vi ...