![background image](http://html1.mh-extra.com/html/omron/nt600m-series/nt600m-series_operation-manual_743776070.webp)
63
6-2
System Menu and Transmit Mode
6-2-1
Quit
To leave the System Menu and return to RUN Mode, select Quit. If no key is
pressed for 10 seconds, the PT will automatically return to RUN Mode.
Quit
Transmit Mode
Maintenance Mode
Expansion Mode
SYSTEM MENU
6-2-2
Transmit Mode
This mode is used to transfer data between the PT and the Support Tool.
6-2-3
Maintenance Mode
When making initial settings or when there is an operating error, select Main-
tenance Mode and conduct all the checks.
Maintenance Mode Menu
Quit
MAINTENANCE MENU
Display Hist.
I/O Check
PT Settings
Init. Memory
Memory SW
Move the bar cursor with the Up key and Down key, and select with the Enter
Key.
6-2-4
Expansion Mode
This mode is not presently being used. This mode is being reserved for
future expansion of functions.
6-2-5
Display History
The NT600M saves into memory and can display the history of screens dis-
played during operation, as long as the history attribute has been set for
them by the Support Tool. The history can be displayed either in order of oc-
currence or in order of frequency. This function can be used to help identify
the causes of malfunctions or to enable the operator to know which functions
are often being used.
System Menu and Transmit Mode
Section 6-2
Summary of Contents for NT600M Series
Page 1: ...NT600M Programmable Terminal Operation Manual Revised October 1997 ...
Page 2: ...iv ...
Page 4: ...vi ...