72
Select “Memory SW” from the Maintenance Mode Menu.
MAINTENANCE MODE MENU
Display History
I/O Check
PT Settings
Initialize Memory
Select one
Memory SW
Quit
Liquid Crystal Display Type
Move the cursor to the item that is to be set and press the Enter Key. Each time
that it is pressed, the set value will change.
After the settings have been made, press the Buzzer, Up, and Down keys to re-
turn to RUN Mode. If the power to the NT600M is turned off at this point, the set-
tings will not be registered.
Quit
MEMORY SW MENU
Key Input Sound
ON
Backlight Off
10 min
Display
Normal
Resume Function
ON
EL Display Type
Quit
MEMORY SW MENU
Key Input Sound
ON
Residual Image Elimination Function
1 hr
Resume Function
ON
Contents of Settings
Item
Setting
Contents
Key input sound
ON
The buzzer sounds for 0.2 second when a system key, touch switch, or
function key is input.
OFF
The buzzer does not sound when a system key, touch switch, or
function key is input.
Backlight off (LCD type)
10 min
If no key input (see note 1) or
command (see note 2) is received
for 10 minutes while a screen is
being displayed, the backlight
turns off.
If a backlight-off command is
transmitted from the host, the
backlight turns off regardless of
this setting.
1 hr
If no key input (see note 1) or
command (see note 2) is received
for one hour while a screen is
being displayed, the backlight
turns off.
None
The backlight stays on constantly.
Memory Switch Settings
Section 6-3
Summary of Contents for NT600M Series
Page 1: ...NT600M Programmable Terminal Operation Manual Revised October 1997 ...
Page 2: ...iv ...
Page 4: ...vi ...
