![background image](http://html1.mh-extra.com/html/omron/nt600m-series/nt600m-series_operation-manual_743776055.webp)
47
4-8
Bar Graphs
If the numeric values that you want to make into a bar graph have been input
into the numeral table in advance, then that graph can be displayed simply
by designating the screen on which the graph is registered. Just as with nu-
meric displays, the graph display is also updated when the contents of the
numeral table are updated. Bar graphs can be displayed either horizontally or
vertically. They can also be displayed in the negative direction.
Example
# 0
1020
# 1
832
# 2
711
to
#255
Line 3
Line 2
Line 1
Line 1
Line 3
Contents registered to screens by Support Tool:
Display positions (50 bars max.)
Graph width (2 to 255 dots)
100% value
% display (yes/no)
% display position
Numeral table numbers for referencing
Display direction
Graph frame (yes/no) (see note)
Sign display
% display fonts
% enlargement sizes
+/-- sign (yes/no)
Number
Contents
Line 2
# 0
# 1
# 2
Graph Display
10%
66%
--55%
Production Targets
Numeral Table
(Maximum of 256 entries)
Order
With sign
Reverse
Production Targets
Line 3
Line 2
Line 1
10%
66%
33%
Production Targets
Reverse
With sign
Order
Note: When “with frame” is set for a graph, the width
of the graph is reduced by two dots, so in that case
the graph must have an original width of at least
three dots.
4-9
Lamps
On the Support Tool you can set lamp areas in the display screen, and the
lamps will light (or blink) by means of a designation from the host. Lamps are
registered in advance at the Support Tool.
Display position:
Can be set as desired, but must match the switch
frames when combining lamps with the switch func-
tion.
Shape:
Rectangle or circle
Lamps
Section 4-9
Summary of Contents for NT600M Series
Page 1: ...NT600M Programmable Terminal Operation Manual Revised October 1997 ...
Page 2: ...iv ...
Page 4: ...vi ...