![background image](http://html1.mh-extra.com/html/omron/nt600m-series/nt600m-series_operation-manual_743776050.webp)
42
4-3
Normal Screen Changes
The displayed screen can be changed to another screen by designating the
screen number from the host (a Programmable Controller or personal com-
puter). The designated screen must have already been created at the Sup-
port Tool and downloaded to the NT600M or it must have been placed in
ROM, with the Screen Data Memory Board installed.
4-3-1
Procedure for Changing Screens
1, 2, 3...
1.
By designating a screen number (0 to 1,000) from the host, you can
switch to the designated screen.
Note
Screen no. 0 is blank (with no display).
2.
When an ordinary screen is displayed, the screens cannot be changed
by means of the Up and Down Keys on the front panel of the NT600M.
3.
The screen-changing procedures vary for each interface. For details,
refer to the
Host Interface Unit Operation Manual
.
When Support Tool versions NT-ZA3AT-EV2 or NT20M-ZASAT-EV4 and later
are used, screen changes can be made on-site. In order to be able to make
on-site screen changes, when creating screen data use the expansion func-
tion to assign screen numbers to touch switches, function keys, or external
inputs.
For example, here a touch switch is assigned
the screen-change function.
Screen 1
Screen 2
Screen 2
Screen 1
4-4
Continuous Screens
Screens can be linked to display consecutively, without breaks. A maximum
of eight screens can be made consecutive, and treated as one screen.
•
By pressing the Up Key and Down Key, you can scroll screens up or down.
•
Page number displays are designated on the Support Tool at the time of
registration.
Standalone Function
Continuous Screens
Section 4-4
Summary of Contents for NT600M Series
Page 1: ...NT600M Programmable Terminal Operation Manual Revised October 1997 ...
Page 2: ...iv ...
Page 4: ...vi ...