Omron K6PM-TH, User Manual

Page: 160 / 198

Appendices
A - 4 K6PM-TH Thermal Condition Monitoring Device User’s Manual (H231)
 Indicator Specifications
Model
K6PM-THMD-EIP
Item
Ethernet
communi-
cations Supported services EtherNet/IP (tag data link or CIP message com-
munications)
BOOTP client
Modbus TCP
Physical layer 100Base-TX
Transmis-
sion specifi-
cations Transmission speed 100 Mbps
Transmission medium Twisted pair cable (with shield: STP): Category
5 or higher
Transmission distance 100 m max. (distance between hub and node)
Tag data
link
*1
*1. When you use tag data link, explicit message communications, and Modbus message communications simul-
taneously, limit the number of client nodes to 4 or less. If simultaneous communication is carried out with 5 or
more nodes, a timeout may occur due to the communications load.
Class1 Connection resource: 4 max.
Packet interval (RPI) 1,000 to 10,000 ms
Timeout value Multiples of RPI (4 times, 8 times, 16 times, 32
times, 64 times, 128 times, 256 times, 512
times)
Connection type Point To Point Connection (fixed)
Explicit
message
*1
Class 3 Number of clients that can communicate at one
time: 2 max.
UCMM Number of clients that can communicate at one
time: 2 max.
Modbus
message
*1
Modbus TCP Number of clients that can communicate at one
time: 2 max.
Factory
default val-
ues IP address 192.168.250.30
Subnet mask 255.255.255.0
Default way 0.0.0.0
IP address setting method Static IP address
Symbol Name Color Status Operating condition
MS Module
Status Green Lit Normal status
Flashes at 1-s
intervals BOOTP server connection error state
Red Lit One of the following fatal errors (Main Unit internal error)
• Internal CPU error
• Internal memory error
Flashes at 1-s
intervals One of the following conditions
• K6PM-TH sensor communications error
• The detection of the K6PM-TH sensor angle deviation
• Sensor type error
• Temperature measurement range exceeded
• Running time error
--- Not lit No power supply