Omron K6PM-TH, User Manual

Page: 194 / 198

Appendices
A - 38 K6PM-TH Thermal Condition Monitoring Device User’s Manual (H231)
A-4-2 Additional Status When General Status Is 01 hex
General
Status
(hex)
Additional
Status
(hex)
Explanation
01 0100 Connection in Use or Duplicate Forward Open.
01 0103 Transport Class and Trigger combination not supported.
01 0106 Ownership Conflict.
01 0107 Connection not found at target application.
01 0108 Invalid Connection Type. Indicates a problem with either the Connection Type or Prior-
ity of the Connection.
01 0109 Invalid Connection Size.
01 0110 Device not configured.
01 0111 RPI not supported. May also indicate problem with connection time-out multiplier, or
production inhibit time.
01 0113 Connection Manager cannot support any more connections.
01 0114 Either the Vendor Id or the Product Code in the key segment did not match the device.
01 0115 Product Type in the key segment did not match the device.
01 0116 Major or Minor Revision information in the key segment did not match the device.
01 0117 Invalid Connection Point.
01 0118 Invalid Configuration Format.
01 0119 Connection request fails since there is no controlling connection currently open.
01 011A Target Application cannot support any more connections.
01 011B RPI is smaller than the Production Inhibit Time.
01 0203 Connection cannot be closed since the connection has timed out.
01 0204 Unconnected_Send timed out waiting for a response.
01 0205 Parameter Error in Unconnected_Send Service.
01 0206 Message too large for Unconnected message service.
01 0207 Unconnected acknowledge without reply.
01 0301 No buffer memory available.
01 0302 Network Bandwidth not available for data.
01 0303 No Tag filters available.
01 0304 Not Configured to send real-time data.
01 0311 Port specified in Port Segment Not Available.
01 0312 Link Address specified in Port Segment Not Available.
01 0315 Invalid Segment Type or Segment Value in Path.
01 0316 Path and Connection not equal in close.
01 0317 Either the segment is not present or the encoded value in the network segment is
invalid. Either the segment is not present or the encoded value in the network segment
is invalid.
01 0318 Link Address to Self Invalid.
01 0319 Resources on Secondary Unavailable.
01 031A Connection already established.
01 031B Direct connection already established.
01 031C Miscellaneous.
01 031D Redundant connection mismatch.
01 031E There are no more available reception resources in the sending module.
01 031F No connection resources exist for target path.
01 0320- 07FF unused.