Omron K6PM-TH, User Manual

Page: 190 / 198

Appendices
A - 34 K6PM-TH Thermal Condition Monitoring Device User’s Manual (H231)
(4)-2 Registering All Tag Sets
Check the check box of the network variable to be used as the input tag among the net-
work-published variables and click the
Register Button, and then the specified tag is dis-
played in the tag set Pane.
If you perform the registering all tag set, the tag set and the tag are displayed as the same
name.
The tag set names displayed can be used as connection settings. (Use these tag set
names, when configuring EtherNet/IP connections using the Network Configurator.)
You can change the tag set names as required.
Also, the tag name displayed under the tag set name must match the variable name regis-
tered as a network variable (input).
Additional Information
If you create connection settings using the Network Configurator, you can share the tag set
names and tag names of the PLC you edit here with the Network Configurator.
(5) Opening the EtherNet/IP Connection Settings (Connection Display)
Click the Connection Button at the upper left of the EtherNet/IP Connection Settings
(Tag Set Display) to display the Connection.
(6) Target Devices Registration to the Connection Settings of the Originator
Register the K6PM devices to the connection settings of the originator device (PLC).
Right click and select Create New (A) or click the (New) Button in the EtherNet/IP Con-
nection Setting Tab Page, then select the K6PM from the pull-down list as the target device.
(This operation can also be performed by double clicking the K6PM in the
Target Device
Pane of the Toolbox.)
The Connection I/O Type is set individually for each connection.
Next, when setting a target variable, if you press Ctrl + space Key at the same time, the
selectable ID number is displayed, so select the ID number to use.
Connection I/O Type Target Variable
Input Assembly 100 100
Input Assembly 101 101
Input Assembly 102 102
Input Assembly 103 103