![background image](http://html1.mh-extra.com/html/omron/fz5-series/fz5-series_hardware-setup-manual_742694071.webp)
3 - 9
3 Configuration
Vision System FZ5 series Hardware Setup Manual (Z423)
3-1 Sen
sor Co
nt
ro
ller
3
3-
1-1 F
H-1
000/2000/300
0/5000 Ser
ies
Component Names and Functions
Connector name
Description
(A)
SD memory card
installation con-
nector
Install the SD memory card. Do not plug or unplug the SD memory card during mea-
surement operation. Otherwise measurement time may be affected or data may be
destroyed.
(B)
Ethernet connec-
tor
Connect an Ethernet device.
(C)
USB connector
Connect a USB device. Do not plug or unplug it during measurement.
Measurement time might be affected otherwise.
(D)
RS-232C connec-
tor
Connect an external device such as a PLC.
(E)
DVI-I connector
Connect a monitor.
(F)
I/O(Parallel) con-
nector (control
lines, data lines)
Connect the controller to external devices such as a sync sensor and PLC.
(G)
EtherCAT
address setup
volume
Used to set a station address (00 to 99) as an EtherCAT communication device.
(H)
EtherCAT com-
munication con-
nector (IN)
Connect the opposed EtherCAT device.
(I)
EtherCAT com-
munication con-
nector (OUT)
Connect the opposed EtherCAT device.
(J)
Encoder connec-
tor
Connect an encoder.
(K)
Camera connec-
tor
Connect cameras.
(A)
(B)
(C)
(D)
(E)
(F)
(G)
(H)
(I)
(K)
(L)
(J)
FH-1050/FH-3050
FH-1050-10/-20, FH-3050-10/-20
FH-2000/5000 series
Upper port :
Ethernet port
Lower port :
Ethernet port,
EtherNet/IP port, and
PROFINET port are
sharing use.
Ethernet port,
EtherNet/IP port, and
PROFINET port are
sharing use.