3 Configuration
3 - 4
Vision System FZ5 series Hardware Setup Manual (Z423)
External
Interface
Serial Communication
RS-232C × 1
Ethernet
Communi-
cation
Protocol
Non-procedure (TCP/UDP)
I/F
1000BASE-T × 2
EtherNet/IP Communica-
tion
Yes (Target/Ethernet port)
PROFINET Communica-
tion
• Yes (Slave/Ethernet port)
• Conformance class A
EtherCAT Communication
Yes (slave)
Parallel I/O
• 12 inputs/31 outputs:
• Use 1 Line.
• Operation mode: Except Multi-line random-trigger mode.
• 17 inputs/37 outputs:
• Use 2 Lines.
• Operation mode: Multi-line random-trigger mode.
• 14 inputs/29 outputs:
• Use 3 to 4 Lines.
• Operation mode: Multi-line random-trigger mode.
• 19 inputs/34 outputs:
• Use 5 to 8 Lines.
• Operation mode: Multi-line random-trigger mode.
Encoder Interface
Input voltage: 5 V ± 5%
Signal: RS-422A Line Driver Level
Phase A/B/Z: 1 MHz
Monitor Interface
DVI-I output (Analog RGB & DVI-D single link) × 1
USB I/F
USB 2.0 host × 2 (BUS Power: 5 V/0.5 A per port)
USB 3.0 host × 2 (BUS Power: 5 V/0.5 A per port)
SD Card I/F
SDHC × 1
Indicator
Lamps
Main
POWER: Green
ERROR: Red
RUN: Green
ACCESS: Yellow
Ethernet
NET RUN1: Green
LINK/ACT1: Yellow
NET RUN2: Green
LINK/ACT2: Yellow
NET RUN:
Green
LINK/ACT:
Yellow
NET RUN1: Green
LINK/ACT1: Yellow
NET RUN2: Green
LINK/ACT2: Yellow
SD Card
SD POWER: Green
SD BUSY: Yellow
EtherCAT
ECAT RUN: Green
LINK/ACT IN: Green
LINK/ACT OUT: Green
ECAT ERR: Red
Supply Voltage
20.4 VDC to 26.4 VDC
Sensor Controller Series
FH-5000 Series
FH-2000 Series
Type
High-speed, Large-capacity Controller
(4 cores)
High-speed, Large-capacity Controller
(2 cores)
Sensor Controller Model
FH-5050
FH-5050-10 FH-5050-20
FH-2000
FH-2000-10 FH-2000-20
