5 - 35
5 Setup and Wiring
Vision System FZ5 series Hardware Setup Manual (Z423)
5-6 In
sert/Re
mov
e SD Memo
ry Card o
r USB flash d
rive
5
5-
6-1 C
ommon in
all series
5-6
Insert/Remove SD Memory Card or
USB flash drive
Precautions for Correct Use
When removing USB flash drive
• Confirm the SD memory card of USB flash drive is not in running, and then remove it.
• Before removing a USB flash drive or SD memory card, make sure that data is not being
read or written to them.
• When a message is displayed indicating that a task is in progress, do not turn OFF the
power.
Do not insert or remove USB flash drive during measurement, loading, and writing.
There is the possibility of measurement time or damage of data.
Additional Information
For external storage device and external drive name, refer to the Using External Storage
Devices and External Drive Name in
Vision System FH/FZ5 Series User’s Manual
(Cat. No.
Z365).
Precautions for Correct Use
Handling of SD memory card
• When you touch a terminal part of SD memory card, antistatic is required by using a wrist
strap or others.
• Do not insert an SD memory card in the reverse orientation, at an angle, or in a twisting man-
ner.
Removing SD memory card
• Before removing a SD memory card, make sure that data is not being read or written to them.
• For an SD memory card, the SD BUSY LED of Sensor Controller flashes while data is being
read or written.
Make sure that the LED stops flashing before removing the card.
• When a message is displayed indicating that a task is in progress, do not turn OFF the
power.
Do not insert or remove SD memory card during measurement, loading, and writing.
There is the possibility of measurement time or damage of data.
5-6-1
Common in all series
5-6-2
FH-1000/2000/3000/5000/FH-L Series
