![Omron fz5 series Hardware Setup Manual Download Page 197](http://html1.mh-extra.com/html/omron/fz5-series/fz5-series_hardware-setup-manual_742694197.webp)
5 - 27
5 Setup and Wiring
Vision System FZ5 series Hardware Setup Manual (Z423)
5-3
Senso
r C
o
n
troller In
stallation
5
5-
3-5 F
Z5-
L Series
Precautions for Safe Use
Power Supply and Wiring
• Keep the power supply wires as short as possible (Max.10 m).
• Use the cables and crimping terminals with the specified dimensions. Do not directly connect
an electric wire to the terminal lock that is simply twisted.
• Recommended wire size: 1.31 to 2.63 mm
2
• Terminal screw: M4 (Tightening torque:1.4 N·m)
• Crimping Terminal
Ground
• The controller power circuit is not insulated from its internal circuit.
• When the connected camera to the Sensor Control comes packaged with a base, make sure
to mount with the base. As the housing of the camera is the SG (0 V), it can cause short-cir-
cuiting between the SG (0 V) and the FG if a spacer is not used.
• It is short-circuited with FG of the customer device when installing it directly because the
case of the controller is connected with SG (0 V).
• Do not ground the 24 VDC power supply's positive terminal. If the positive terminal is
grounded, it causes the electric shock when you touch the SG (0 V) such as case of the con-
troller or the camera.
Use the cables and crimping terminals with the specified dimensions.
Keep the power supply wires as short as possible (Max.10 m).
Wire the power supply unit independently of other devices.
Do not directly connect an electric wire to the terminal block that is simply twisted.
After wiring, replace the terminal cover.
Power source types for FZ5-L series differ depending on the number of cameras due to current con-
sumption differences. Refer to the following table to use the appropriate type. When you connect your
camera to the lighting via Light Controller, the current consumption is same as when the Intelligent
Compact Digital camera is connected.
FZ5-L Series
5-3-5
FZ5-L Series
Connection of Terminal Block of FZ5-L Series
Recommended Power Source for FZ5-L Series
Item
Camera Type
Number of
Camera
FZ5-L35
FZ5-L35
-10
Recommended Source
S8VS
Intelligent Compact
Digital Camera
2
S8VS-12024
S8VS-18024
4
---
Camera of 0.3/2/5
million pixels
2
S8VS-09024
S8VS-09024
4
---
8.5 mm max.
8.5 mm max.