6 - 3
6 I/O Interface
Vision System FZ5 series Hardware Setup Manual (Z423)
6-1 Parallel In
terfac
e
6
6-
1-2 F
H-100
0/2000/3000/
5000 Series
Parallel interface are common NPN/PNP type. An appropriate wiring is required according on the exter-
nal device.
Encoder interface (open corrector type) is also included.
Encoder interface (open corrector type) is ENCTRIG_A*, ENCTRIG_B*, and ENCTRIG_Z*.
Wire the pins to Encoder appropriately.
• Specifications differ by number of pins
• Encoder interface (open corrector type) is ENCTRIG_A*(8 pins,11 pins), ENCTRIG_B* (12 to 13
pins, or ENCTRIG_Z*' (4 to 5 pin). The frequency response of Encoder interface (open corrector
type) is 4 KHz.
[Input]
Applicable signals/
• No.14 pin:
Connect the COMIN1 terminal when using these signals.
• No.37 to 46 pins:
Connect the COMIN2 terminal when using these signals.
6-1-2
FH-1000/2000/3000/5000 Series
Interface Specification
Item
Specifications
Input voltage
12 to 24 VDC ±10%
ON current
*1
*1. ON current and ON voltage:
Those mean the current or voltage to turn ON from OFF. The ON voltage value is the potential difference
between COMIN and each input terminal
5 mA min.
ON voltage
*1
8.8 V min.
OFF current
*2
*2. OFF current and OFF voltage:
Those mean the current or voltage to turn OFF from ON. The OFF voltage value is the potential difference
between COMIN and each input terminal
0.5 mA max.
OFF voltage
*2
1.1 V max.
ON delay
5 ms max.
OFF delay
0.7 ms max.
