3 Configuration
3 - 30
Vision System FZ5 series Hardware Setup Manual (Z423)
Component Names and Functions
Connector name
Description
(1)
POWER LED
Lit while power is ON.
(2)
RUN LED
Lit while the layout turned on output setting is displayed.
(3)
ERROR LED
Lit when an error has occurred.
(4)
I/O connector (con-
trol lines, data lines)
Connect the controller to external devices such as a sync sensor.
(5)
Camera connector
Connect cameras.
(6)
Power
Connect a DC power supply.
Wire the power supply unit independently of other devices.
After wiring, replace the terminal cover.
(7)
Monitor connector
(analog RGB)
Connect a monitor.
(8)
RS-232C connector
Connect an external device such as a personal computer.
(9)
USB connector
Connect a track ball, mouse and USB flash drive. A total of four USB ports are
provided and any of them can be used.
However, when connecting two USB memories, do not connect them to adjacent
ports. Doing so may cause the USB memories to come into contact, resulting in
malfunction or damage.
(10)
Ethernet connector
Connect Ethernet device.
Ethernet port and EtherNet/IP port are sharing use.
(1)
(9)
(7)
(10)
(5)
(8)
(6)
(4)
(2)
(3)
