Omron FB LIBRARY -, Startup Manual

Page: 154 / 162

NCF
FBL omronlib
Position
Controller
NCF
†
Position Controller
NCx
FBL omronlib
Position
Controller
NCx
FB Name Function Name Basic function Target
_NCF010_MoveAbsolute_ REAL Move Absolute Positions using an absolute move.
_NCF011_MoveAbsolute_DINT Absolute Move Positions using an absolute move.
_NCF020_MoveRelative_ REAL Move Relative Positions using a relative move.
_NCF021_MoveRelative_DINT Relative Move Positions using a relative move.
_NCF030_MoveVelocity_ REAL Speed Control Controls the speed.
_NCF031_MoveVelocity_DINT Speed Control Controls the speed.
_NCF040_TorqueControl_REAL Torque Control Controls torque.
_NCF041_TorqueControl_DINT Control Torque Controls torque.
_NCF050_Home_REAL Origin Search Performs an origin search operation to establish the origin.
_NCF051_Home_DINT Origin Search Performs an origin search operation to establish the origin.
_NCF060_Stop Stop Deceleration Decelerates an axis to a stop.
_NCF070_Power Operation Command Turns the main power circuit ON and OFF.
_NCF080_Reset Reset Axis Error Resets and axis error.
_NCF200_ReadStatus Read Status Reads the status of an axis.
_NCF201_ReadParameter Read Parameter Reads a servo parameter of an axis.
_NCF202_ReadBoolParameter Read Boolean Parameter Reads a Boolean parameter.
_NCF203_ReadAxisError Read Axis Error Reads axis error information.
_NCF204_ReadActualPosition_REAL Read Present Position Reads the present position of an axis.
_NCF205_ReadActualPosition_DINT Read Present Position Reads the present position of an axis.
_NCF401_WriteParameter Write Parameter Writes an axis servo parameter.
_NCF402_WriteBoolParameter Write Boolean Parameter Writes a Boolean parameter.
NCF CJ1W-NCF7
FB Name Function Name Basic function Target
_NCx010_MoveAbsolute_REAL Move Absolute Positions using an absolute move.
_NCx011_MoveAbsolute_DINT Move Absolute Positions using an absolute move.
_NCx020_MoveRelative_REAL Move Relative Positions using a relative move.
_NCx021_MoveRelative_DINT Move Relative Positions using a relative move.
_NCx050_Home_REAL Origin Search Performs an origin search operation to establish the origin.
_NCx051_Home_DINT Origin Search Performs an origin search operation to establish the origin.
_NCx060_Stop Deceleration Stop Decelerates an axis to a stop.
_NCx080_Reset Axis Error Reset Resets and axis error.
_NCx200_ReadStatus Read Status Reads the status of an axis.
_NCx201_ReadParameter Read Parameter Reads a parameter of an axis.
_NCx202_ReadBoolParameter Read Boolean Parameter Reads a boolean parameter of an axis.
_NCx203_ReadAxisError Read Axis Error Reads axis error information.
_NCx204_ReadActualPosition_REAL Read Present Position Reads the present position of an axis.
_NCx205_ReadActualPosition_DINT Read Present Position Reads the present position of an axis.
_NCx401_WriteParameter Write Parameter Writes an axis parameter.
_NCx402_WriteBoolParameter Write Boolean Parameter Writes a Boolean parameter.
_NCx600_Setting Set Unit Sets the Position Control Unit.
NCx
CS1W-
NC113/133
CS1W-
NC213/233
CS1W-
NC413/433
CJ1W-
NC113/133
CJ1W-
NC213/233
CJ1W-
NC413/433
List of The OMRON FB Library