Omron FB LIBRARY -, Startup Manual

Page: 62 / 162

(4) Attach the auxiliary mounting bracket on screws that fixed the digital operator and
terminal board cover, and use auxiliary screws to fix them.
* Do not forget to attach the mounting bracket.
(5) In the back of DeviceNet communication unit, there is a grounded terminal to which
shielded communication cable is connected. Connect this terminal and the inverter’s FG
terminal.
(6) Fit the DeviceNet communication unit’s connector and the inverter’s one on the right
position, then connect the inverter and the unit. Press the unit until you hear a click sound.
(7) Use screws on the top of DeviceNet communication unit to clamp the bracket in step (4).
2-6 Inverter
3G3MV-A2
†††
/-AB
†††
/-A4
†††
3G3RV-A2
†††
/-A4
†††