Omron FB LIBRARY -, Startup Manual

Page: 141 / 162

1. Hardware Setup
2. Creating I/O Table
3. Setting Initial Setup Data
Setting unit No. using a rotary switch on the front panel
Setting unit No. using a rotary switch on the front panel
Setting input type using a rotary switch on the front panel
Setting input type using a rotary switch on the front panel
Setting temperature control function using a rotary switch on the front panel
Setting temperature control function using a rotary switch on the front panel
Wiring the compensating lead wire of heat coupler to the unit
Wiring the compensating lead wire of heat coupler to the unit
Turning PC main unit ON
Turning PC main unit ON
Connecting the CX-Programmer
Connecting the CX-Programmer
Creating I/O table
Creating I/O table
Setting warning mode/warning hysteresis range
Setting warning mode/warning hysteresis range
Turning restart flag of temperature control unit ON and read
setting value into the unit.
Turning restart flag of temperature control unit ON and read
setting value into the unit.
4. Setting Operation Control
Data
Setting PID constant, operation cycle, alarm mode setting
figures, etc in DM parameter area.
Setting PID constant, operation cycle, alarm mode setting
figures, etc in DM parameter area.
Sample program that set setting value into the temperature
setting unit.
Sample program that set setting value into the temperature
setting unit.
5. Usage Example of FB Component
2. Operational Workflow
2-13 Temperature Control Unit
CJ1W-TC001/101/003/103/002/102/004/104