Omron FB LIBRARY -, Startup Manual

Page: 4 / 162

For higher efficiency design of facility/device using Omron’s programmable controller and
control component, Omron supports Function Block (hereinafter FB) with programmable
controller SYSMAC CS/CJ series and programming tool CX-Programmer V.5.0. In addition,
Omron provides
“OMRON FB Library” for easier programming of data exchange with various
control components attached to PLC through various units and networks. “OMRON FB
Library” is a collection of FB software function components that you can incorporate into your
system as it is.
Omron is going to add more components to this OMRON FB Library to contribute for higher
efficiency and quality of your PLC programming.
This OMRON FB Library Start Up Guide introduces you how to connect PLC that uses
“OMRON FB Library” and other devices, with specific examples. Refer to these examples for
your design of facilities and devices using Omron’s PLC and control component.
PLC models for which you can use OMRON FB Library
CS1G-CPU
††
H (Unit Ver.3.0 or later)
CS1H-CPU
††
H (Unit Ver.3.0 or later)
CJ1G-CPU
††
H (Unit Ver.3.0 or later)
CJ1H-CPU
††
H (Unit Ver.3.0 or later)
CJ1M-CPU
††
(Unit Ver.3.0 or later)
Programming tool for which you can use OMRON FB Library
CX-Programmer Ver.5.0 or later (WS02-CXPC1-JV5)