CHAPTER 3 BASIC OPERATION
E5AK
3--8
In this example, let’s set the parameters as follows:
“control output 1 assignment” = “control output (heat)”
“control output 2 assignment” = “alarm output 1”
“direct/reverse operation”
= “reverse operation”
“control period”
= “20 secs”
“run/stop”
= “run”
All of the above settings in this example are factory settings. So, in this
example, we are only going to check the parameter settings.
(1) Select the menu display, and select [
] (setup mode) using the
or
keys. For details on selecting the menu display, see page
1-8.
(2) Press the
key to enter the setup mode. The top parameter in the
setup mode [
] “input type” is displayed. In this example, the
parameter setting is “17: 4 to 20 mA.”
(3) Press the
key until [
] (“control output 1 assignment”
parameter) is displayed. The parameter default is [
].
(4) As the setting in this example is to be left as it is, press the
key.
The display changes to [
] (“control output 2 assignment”
parameter). The parameter default is [
].
(5) As the setting in this example is to be left as it is, press the
key
until [
] (“direct/reverse operation” parameter) is displayed.
The parameter default is [
].
(6) As the setting in this example is to be left as it is, press the
or
keys to select [
] (level 1 mode). For details on selecting the menu
display, see page 1-8.
(7) Press the
key to enter the level 1 mode. The top parameter in the
level 1 mode [
] “AT execute/cancel” is displayed.
(8) Press the
key until [
] (“control period” parameter) is dis-
played. The parameter default is “20”. As the setting in this example
is to be left as it is, quit key operation.
Setting Example
1 second min.
1 second min.
1 second min.