Omron CX-MOTION - 06-2008, Operation Manual

Page: 34 / 135

15
Basic Operations Section 3-1
Starting the CX-Motion-MCH Using Start Special Application - Start Only from the I/O Table Window
Opened from the CX-Programmer That Was Installed from the CX-One
Right-click a Motion Control Unit in the I/O Table Window and select Start
Special Application - Start Only from the pop-up menu. The following win-
dow will be displayed.
Starting the CX-Motion-MCH from Windows Start Menu
Select Start - Programs - OMRON - CX-One - CX-Motion-MCH - CX-
Motion-MCH . The same window as when selecting Start Only will be dis-
played.
Quitting the CX-Motion-MCH
1,2,3... 1. Select File - Exit or click the at the top right corner of the window. After
editing a project, if the project has not been saved, the following dialog box
will be displayed.
2. Click the Yes Button to save the changes made. Click the No Button if it is
not necessary to save the changes. Click the Cancel Button to return to
the Basic Window without quitting CX-Motion-MCH.
Main Menus
Main Menu Contents Keyboard
shortcut
File Used to create or save projects. Alt+F
Edit Used to edit the MC Unit’s data. Alt+E
View Used to display or hide the Toolbars, Windows, or the
Status Bar. Alt+V
Insert Used to insert an MC Unit, motion task, axis, program,
subprogram, or CAM table into a project. Alt+I
Online Used to establish communications with the MC Unit. Alt+O
Program Used to compile the program. Alt+P
Debug Used to debug the program. Alt+D
Tools Used to change the fonts or toolbar. Alt+T