Omron CX-MOTION - 06-2008, Operation Manual

Page: 21 / 135

2
What is the CX-Motion-MCH? Section 1-1
1-1 What is the CX-Motion-MCH?
Introduction
The CX-Motion-MCH is a software package that can be used to set, create,
and print various data required to control MC Units (such as system parame-
ters, position data, motion task programs, and CAM data), transfer the data to
and from the MC Unit, compare the data in the computer with the data in the
MC Unit, and monitor the operating status of the MC Unit.
The CX-Motion-MCH runs on Windows 98, Me, NT 4.0, 2000, XP, or Vista.
Applicable MC Units
The CX-Motion-MCH supports the following MC Units.
Refer to 1-2 System Configuration for details on the system configuration.
Applicable
Computers
Refer to the CX-One Ver. 3.0 Setup Manual (W463) for the computer system
requirements for the CX-Motion-MCH.
Checking the Package
Refer to the CX-One Ver. 3.0 Setup Manual (W463) for details on the contents
of the CX-One package that includes the CX-Motion-MCH.
Computer with Windows
operating system
Set and transfer the
various data and
programs required to
control the MC Unit.
Monitor the MC Unit's
operating status, e.g.,
error information or each
axis' present position.
CS1W-MCH71
CJ1W-MCH71
Model number Applicable PLCs
CS1W-MCH71
Recent versions of CS1 CPU Units (CS1
@
-CPU
@@
H)
CJ1W-MCH71 CJ2 CPU Units
CJ1H/CJ1M CPU Units with unit version 2.0 or later, CP-
series PLCs, and NSJ-series NSJ Controllers
Cat. No. Model Manual name Contents
W463
CXONE-AL
@@
C-
V3/AL
@@
D-V3
CX-One Ver. 3.0
Setup Manual Installation and
overview of CX-
One FA Integrated
Tool Package.