130
Pulse Outputs
Section 7-6
7-6
Pulse Outputs
7-6-1
Applicable Models
7-6-2
Outline
The CS1W-HCP22-V1 Customizable Counter Unit provides 2 pulse outputs.
The pulse outputs can be used for the following functions.
Note
Set the pulse output mode for each output in User Setup Area words DM 6613
and DM 6614.
Note
1.
The processes listed in the following table can be performed for the PV of
a pulse output, pulse output counter timer, or one-shot pulse output
elapsed time.
2.
Cannot be combined with pulse output in independent mode.
Model numbers
Functions
CS1W-HCP22-V1
12 contact inputs, 8 contact outputs, 2 pulse inputs, 2 pulse outputs
Function
Description
Processing for PV
Pulse outputs
The pulse outputs can be used for positioning or speed control at
a fixed duty ratio. Select one of five pulse output modes: Relative
pulse output, linear absolute pulse output, ring absolute pulse
output, electronic cam (linear), and electronic cam (ring).
Target value interrupts (note 2)
or bit pattern outputs for range
comparisons for PV of pulse out-
put.
One-shot pulse out-
puts
Pulse output turned ON for only the specified interval (0.01 to
9,999 ms.)
None
Pulse output
counter timer
Enables using the pulse output counter as a timer using the one-
shot pulse output timer.
Note:
Pulses are not output for this mode and the specified port
cannot be used for pulse output.
Target value interrupts or bit pat-
tern outputs for range compari-
sons for PV of pulse counter.
Process
Description
Target value interrupts
A subroutine is executed as interrupt processing when
the high-speed counter PV equals a target value.
Bit pattern outputs for
range comparisons
A user-set bit pattern is output internally when the high-
speed counter PV is within a specified range.
Summary of Contents for CS1W-HCA12-V1
