Omron CJ1G-CPU series, Programming Manual

Page: 286 / 383

265
Serial Communications Section 6-3
RE EM AREA READ Reads the contents of the specified number of EM Area words, starting
from the specified word.
WR CIO AREA WRITE Writes the specified data (word units only) to the CIO Area, starting
from the specified word.
WL LINK AREA WRITE Writes the specified data (word units only) to the Link Area, starting
from the specified word.
WH HR AREA WRITE Writes the specified data (word units only) to the Holding Area, starting
from the specified word.
WC PV WRITE Writes the PVs (present values) of the specified number of timers/
counters, starting from the specified timer/counter.
WD DM AREA WRITE Writes the specified data (word units only) to the DM Area, starting from
the specified word.
WJ AR AREA WRITE Writes the specified data (word units only) to the Auxiliary Area, starting
from the specified word.
WE EM AREA WRITE Writes the specified data (word units only) to the EM Area, starting from
the specified word.
R# SV READ 1 Reads the 4-digit BCD constant or word address in the SV of the spec-
ified timer/counter instruction.
R$ SV READ 2 Searches for the specified timer/counter instruction beginning at the
specified program address and reads the 4-digit constant or word
address in the SV.
R% SV READ 3 Searches for the specified timer/counter instruction beginning at the
specified program address and reads the 4-digit BCD constant or word
address in the SV.
W# SV CHANGE 1 Changes the 4-digit BCD constant or word address in the SV of the
specified timer/counter instruction.
W$ SV CHANGE 2 Searches for the specified timer/counter instruction beginning at the
specified program address and changes the 4-digit constant or word
address in the SV.
W% SV CHANGE 3 Searches for the specified timer/counter instruction beginning at the
specified program address and changes the 4-digit constant or word
address in the SV.
MS STATUS READ Reads the operating status of the CPU Unit (operating mode, force-set/
reset status, fatal error status).
SC STATUS CHANGE Changes the CPU Unit’s operating mode.
MF ERROR READ Reads and clears errors in the CPU Unit (non-fatal and fatal).
KS FORCE SET Force-sets the specified bit.
KR FORCE RESET Force-resets the specified bit.
FK MULTIPLE FORCE SET/RESET Force-sets, force-resets, or clears the forced status of the specified
bits.
KC FORCE SET/RESET CANCEL Cancels the forced status of all force-set and force-reset bits.
MM PLC MODEL READ Reads the model type of the PLC.
TS TEST Returns, unaltered, one block of data transmitted from the host com-
puter.
RP PROGRAM READ Reads the contents of the CPU Unit’s user program area in machine
language (object code).
WP PROGRAM WRITE Writes the machine language (object code) program transmitted from
the host computer into the CPU Unit’s user program area.
MI I/O TABLE GENERATE Creates a registered I/O table with the actual I/O table.
QQMR COMPOUND COMMAND Registers the desired bits and words in a table.
QQIR COMPOUND READ Reads the registered words and bits from I/O memory.
XZ ABORT (command only) Aborts the host link command that is currently being processed.
Header
code
Name Function