Omron CJ1G-CPU series, Programming Manual

Page: 222 / 383

201
Manipulating Files Section 5-2
CX-Programmer Use the following procedure for file memory operations.
1,2,3... 1. Double-click the Memory Card icon in the Project Window with the CPU
Unit online. The Memory Card Window will be displayed.
2. To transfer from the CPU Unit to file memory, select the program area, I/O
memory area, or parameter area in the project work space, select Transfer
from the File Memory, and then select transfer to the Memory Card or to
EM file memory.
or To transfer from file memory to the CPU Unit, select file in file memory
and then drag it to the program area, I/O memory area, or parameter area
in the project work space and drop it.
Note Use project transfer operations to create and read symbol table files (SYM-
BOLS.SYM) and comment files (COMMENTS.CMT) on the CX-Programmer.
Programming Console
The following operations can be performed.
HMC-AP001 Memory Card Adapter
Memory Card
Computer's PC Card slot
CLR
000000 CT00
FUN SHIFT
CONT
#
0: Transfer
1: Verify
↓
0: Initialize
1: Delete
Item 1 Item 2 Item 3 Item 4 Item 5
0: Send 0: PLC to Memory Card Select OBJ, CIO, HR, WR,
AR, DM, EM, or STD.
Set transfer start and
end addresses. Media type, file name
1: Memory Card to PLC Select OBJ, CIO, HR, WR,
AR, DM, EM, or STD.
Set transfer start and
end addresses. Media type, file name
1: Verify Select OBJ, CIO, HR, WR,
AR, DM, EM, or STD. Set comparison start and
end addresses. Media type, file name