392
Standard Models
Appendix
Connectors
Model
Specifications
Branch Connector
SCN1-TH4
Use this connector to branch a cable.
(Used with OMRON Flat Cable only.)
Extension Connector
SCN1-TH4E
Use this connector to extend the OMRON Flat Cable.
Connector Terminator
SCN1-TH4T
This connector has a built-in terminator.
(Used with OMRON Flat Cable only.)
Round Water-resistant Con-
nectors with Cable (socket
and plug)
XS2W-D42
@
-
@
81-
@
Use this connector to connect Water-resistant Terminals and T-
joints.
Can be used as a power supply cable (with the female socket
connected to the Water-resistant Terminal).
Can be used as an I/O cable for sensors that have connectors
(with the male plug connected to the Water-resistant Terminal, if
the product has a model number suffix “A”).
Connector with Cable
(female socket on one end)
XS2F-D42
@
-
@
80-
@
A connector with cable used to connect Water-resistant Termi-
nals to T-branch connectors.
Can be used as a power supply cable (with the female socket
connected to the Water-resistant Terminal) and the other end
wired to a commercially available terminal block.
Connector with Cable (male
plug on one end)
XS2H-D421-
@
80-A
A connector with cable used to connect Water-resistant Termi-
nals to I/O devices.
Can be used as an I/O cable (with the male plug connected to
the Water-resistant Terminal) and the other end wired to the I/O
device with loose wires.
Connector Socket Assembly
(female) (Crimp terminals/
Solder terminals)
XS2C-D4S7
A connector used to connect to the communications connectors
or external power supply connectors of Water-resistant Terminals
or T-joint plugs.
Applicable cable dia.: 3 to 6 mm
Applicable conductor size: 0.18 to 0.75 mm
2
XS2C-D4
@@
A connector used to connect to the external power supply con-
nectors of Water-resistant Terminals or T-joint plugs.
Applicable cable dia.: 3 to 6 mm
Applicable conductor size: 0.18 to 0.3 or 0.5 to 0.75 mm
2
Connector Plug Assembly
(male) (Crimp terminals/Sol-
der terminals)
XS2G-D4S7
A connector used to connect to T-joint sockets.
Applicable cable dia.: 6 to 8 mm
Applicable conductor size: 0.18 to 0.75 mm
2
XS2G-D4
@@
A connector used to connect to I/O connectors of Water-resistant
Terminals or T-joint sockets.
Applicable cable dia.: 3 to 6 mm
Applicable conductor size: 0.18 to 0.3 or 0.5 to 0.75 mm
2
T-joint
XS2R-D427-5
A joint used to T-branch a VCTF cable (e.g., a communications
cable or power supply cable).
Communications Connector
(6-pin)
FK-MCP1.5/6-STF-
3.81
A communications connector for connecting CJ-series Master
Units. Communications cables (BD H, BD L, BS+, BS–) and
communications power lines (BS +, BS–) can be connected
simultaneously. This connector has screwless terminals for sig-
nal lines and connector lock screws.
MC1.5/6-STF-3.81
A communications connector for connecting CJ-series Master
Units. Communications cables (BD H, BD L, BS+, BS–) and
communications power lines (BS +, BS–) can be connected
simultaneously. This connector has screw terminals for signal
lines and connector lock screws.
Communications Connector
(Connector Terminals)
BL3.5/6F (Product No.
160668)
Communications cables, communications power supply and I/O
power supply connectors manufactured by Weidmuller Co., Ltd.
Shielded Terminator Plug
(Male)
SRS2-1
A shielded terminator plug used to connect to T-joints.
Terminal-block Terminator
SRS1-T
This terminal block has a built-in terminator. (Can be used with 2-
or 4-conductor VCTF cable and OMRON’s Special Flat Cable.)
